Reliable water
analysis with Jensprima

Through Divinov Engineering, you can request equipment from the Jensprima Moldova range for water quality analysis and liquid monitoring: pH/ORP sensors, conductivity sensors, turbidity sensors, dissolved oxygen, residual chlorine, TSS/suspended solids, controllers and online analyzers.

To choose the right Jensprima water analyzer, the first step is to define the measured parameter: pH, ORP, conductivity, turbidity, dissolved oxygen, residual chlorine, hardness or other water quality indicators. Then it is important to check the measuring range, liquid type, temperature, installation conditions, calibration requirements and output signal for the control system.

A pH sensor measures the acidity or alkalinity of a liquid. A conductivity sensor indicates the level of dissolved salts, minerals or ionic impurities in water. A turbidity sensor measures how cloudy the liquid is, meaning the presence of suspended particles. The correct choice depends on which parameter needs to be monitored in the process.

Yes, many Jensprima devices are suitable for continuous online monitoring in industrial processes, water treatment, wastewater, process water and other installations where liquid quality must be monitored constantly. Depending on the model, the equipment can transmit data to a PLC, controller or SCADA system.

For an accurate offer, it is useful to send the parameter that needs to be measured, measuring range, liquid type, temperature, pressure, installation conditions, required quantity and integration method. If there is already equipment installed, the product code, photos of the technical label and application description are also helpful. This information helps us identify a suitable solution from the Jensprima Moldova range more quickly.

Yes, Jensprima analyzers can be used in water treatment, drinking water monitoring, wastewater, industrial processes and online control of liquid parameters. Depending on the application, solutions can be selected for pH, conductivity, turbidity, residual chlorine, dissolved oxygen, hardness, TSS or other important parameters.

Yes. If you do not know the exact model, you can describe the application, the liquid being analyzed, the parameter you want to monitor and how the data will be used. Based on this information, Divinov Engineering can help select a suitable Jensprima Moldova solution or a compatible alternative for the application.